Struct arcdps_imgui::TableFlags

pub struct TableFlags { /* private fields */ }

Flags passed to begin_table methods.

Important! Sizing policies have complex and subtle side effects, more so than you would expect. Read comments/demos carefully + experiment with live demos to get acquainted with them.

• The DEFAULT sizing policies are:
  • Default to [SizingFixedFit] if [ScrollX] is on, or if host window has (WindowFlags::AlwaysAutoResize)[crate::WindowFlags::AlwaysAutoResize].
  • Default to [SizingStretchSame] if [ScrollX] is off.
• When [ScrollX] is off:
  • Table defaults to [SizingStretchSame] -> all Columns defaults to [TableColumnFlags::WidthStretch] with same weight.
  • Columns sizing policy allowed: [Stretch] (default), [Fixed]/Auto.
  • [Fixed] Columns will generally obtain their requested width (unless the table cannot fit them all).
  • [Stretch] Columns will share the remaining width.
  • Mixed [Fixed]/[Stretch] columns is possible but has various side-effects on resizing behaviors. The typical use of mixing sizing policies is: any number of LEADING [Fixed] columns, followed by one or two TRAILING [Stretch] columns. (this is because the visible order of columns have subtle but necessary effects on how they react to manual resizing).
• When [ScrollX] is on:
  • Table defaults to [SizingFixedFit] -> all Columns defaults to [TableColumnFlags::WidthFixed]
  • Columns sizing policy allowed: [Fixed]/Auto mostly.
  • [Fixed] Columns can be enlarged as needed. Table will show an horizontal scrollbar if needed.
  • When using auto-resizing (non-resizable) fixed columns, querying the content width to use item right-alignment e.g. SetNextItemWidth(-FLT_MIN) doesn’t make sense, would create a feedback loop.
  • Using [Stretch] columns OFTEN DOES NOT MAKE SENSE if [ScrollX] is on, UNLESS you have specified a value for inner_width in BeginTable(). If you specify a value for inner_width then effectively the scrolling space is known and [Stretch] or mixed [Fixed]/[Stretch] columns become meaningful again.
• Read on documentation at the top of imgui_tables.cpp for more details.

Implementations

impl TableFlags

pub const RESIZABLE: Self = _

Enable resizing columns.

pub const REORDERABLE: Self = _

Enable reordering columns in header row, though you must set up a header row with begin_table_header or table_setup_column.

pub const HIDEABLE: Self = _

Enable hiding/disabling columns in context menu.

pub const SORTABLE: Self = _

Enable sorting. See table_get_sort_specs to object sort specs. Also see [SortMulti] and [SortTristate].

pub const NO_SAVED_SETTINGS: Self = _

Disable persisting columns order, width, and sort settings in the .ini file.

pub const CONTEXT_MENU_IN_BODY: Self = _

Right-click on columns body/contents will display table context menu. By default you can only right click in a headers row.

pub const ROW_BG: Self = _

Set each RowBg color with [table_row_bg] or [table_row_bg_alt] (equivalent of calling table_set_bg_color with ROW_BG0 on each row manually)

pub const BORDERS_INNER_H: Self = _

Draw horizontal borders between rows.

pub const BORDERS_OUTER_H: Self = _

Draw horizontal borders at the top and bottom.

pub const BORDERS_INNER_V: Self = _

Draw vertical borders between columns.

pub const BORDERS_OUTER_V: Self = _

Draw vertical borders on the left and right sides.

pub const BORDERS_H: Self = _

Draw all horizontal borders (this is just [BORDERS_INNER_H] | [BORDERS_OUTER_H]).

pub const BORDERS_V: Self = _

Draw all vertical borders (this is just [BORDERS_INNER_V] | [BORDERS_OUTER_V]).

pub const BORDERS_INNER: Self = _

Draw all inner borders (this is just [BORDERS_INNER_H] | [BORDERS_INNER_V]).

pub const BORDERS_OUTER: Self = _

Draw all outer borders (this is just [BORDERS_OUTER_H] | [BORDERS_OUTER_V]).

pub const BORDERS: Self = _

Draw all borders (this is just [BORDERS_INNER] | [BORDERS_OUTER]).

pub const NO_BORDERS_IN_BODY: Self = _

ALPHA Disable vertical borders in columns Body (borders will always appears in Headers). May move to Style

pub const NO_BORDERS_IN_BODY_UNTIL_RESIZE: Self = _

ALPHA Disable vertical borders in columns Body until hovered for resize (borders will always appears in Headers). May move to style

pub const SIZING_FIXED_FIT: Self = _

Columns default to [WidthFixed] or [WidthAuto] (if resizable or not resizable), matching contents width.

pub const SIZING_FIXED_SAME: Self = _

Columns default to [WidthFixed] or [WidthAuto] (if resizable or not resizable), matching the maximum contents width of all columns. Implicitly enable [NoKeepColumnsVisible].

pub const SIZING_STRETCH_PROP: Self = _

Columns default to [WidthStretch] with default weights proportional to each columns contents widths.

pub const SIZING_STRETCH_SAME: Self = _

Columns default to [WidthStretch] with default weights all equal, unless overridden by a column’s TableHeader.

pub const NO_HOST_EXTEND_X: Self = _

Make outer width auto-fit to columns, overriding outer_size.x value. Only available when [ScrollX]/[ScrollY] are disabled and [Stretch] columns are not used.

pub const NO_HOST_EXTEND_Y: Self = _

Make outer height stop exactly at outer_size.y (prevent auto-extending table past the limit). Only available when [ScrollX]/[ScrollY] are disabled. Data below the limit will be clipped and not visible.

pub const NO_KEEP_COLUMNS_VISIBLE: Self = _

Disable keeping column always minimally visible when [ScrollX] is off and table gets too small. Not recommended if columns are resizable.

pub const PRECISE_WIDTHS: Self = _

Disable distributing remainder width to stretched columns (width allocation on a 100-wide table with 3 columns: Without this flag: 33,33,34. With this flag: 33,33,33). With larger number of columns, resizing will appear to be less smooth.

pub const NO_CLIP: Self = _

Disable clipping rectangle for every individual columns (reduce draw command count, items will be able to overflow into other columns). Generally incompatible with [table_setup_scroll_freeze].

pub const PAD_OUTER_X: Self = _

Default if [BordersOuterV] is on. Enable outer-most padding. Generally desirable if you have headers.

pub const NO_PAD_OUTER_X: Self = _

Default if [BordersOuterV] is off. Disable outer-most padding.

pub const NO_PAD_INNER_X: Self = _

Disable inner padding between columns (double inner padding if [BordersOuterV] is on, single inner padding if BordersOuterV is off).

pub const SCROLL_X: Self = _

Enable horizontal scrolling. Require ‘outer_size’ parameter of [begin_table] to specify the container size. Changes default sizing policy. Because this create a child window, [ScrollY] is currently generally recommended when using [ScrollX].

pub const SCROLL_Y: Self = _

Enable vertical scrolling. Require ‘outer_size’ parameter of [begin_table] to specify the container size.

pub const SORT_MULTI: Self = _

Hold shift when clicking headers to sort on multiple column. [table_get_sort_specs] may return specs where [spec_count] > 1.

pub const SORT_TRISTATE: Self = _

Allow no sorting, disable default sorting. table_get_sort_specs may return specs where [specs_count] == 0.

pub const fn empty() -> Self

Returns an empty set of flags.

pub const fn all() -> Self

Returns the set containing all flags.

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations

impl Binary for TableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for TableFlags

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

type Output = TableFlags

The resulting type after applying the & operator.

impl BitAndAssign for TableFlags

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

impl BitOr for TableFlags

fn bitor(self, other: TableFlags) -> Self

Returns the union of the two sets of flags.

type Output = TableFlags

The resulting type after applying the | operator.

impl BitOrAssign for TableFlags

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

impl BitXor for TableFlags

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

type Output = TableFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for TableFlags

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

impl Clone for TableFlags

fn clone(&self) -> TableFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Extend<TableFlags> for TableFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl FromIterator<TableFlags> for TableFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator.

impl Hash for TableFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl LowerHex for TableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for TableFlags

fn not(self) -> Self

Returns the complement of this set of flags.

type Output = TableFlags

The resulting type after applying the ! operator.

impl Octal for TableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Ord for TableFlags

fn cmp(&self, other: &TableFlags) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for TableFlags

fn eq(&self, other: &TableFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for TableFlags

fn partial_cmp(&self, other: &TableFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Sub for TableFlags

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

type Output = TableFlags

The resulting type after applying the - operator.

impl SubAssign for TableFlags

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

impl UpperHex for TableFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for TableFlags

impl Eq for TableFlags

impl StructuralPartialEq for TableFlags